lg_zb11 发表于 12-4-4 01:01:06

今天尝试在OBR的网站上买了点东西试试!希望能行!

本帖最后由 lg_zb11 于 12-4-4 01:07 编辑

如题,在OBR的网站尝试买了点东西,不知道OBR是否直接发中国!OBR的引擎是很好的,也经常搞活动,搞活动的时候比直接在DDM或者TGN买要合算多~\(≧▽≦)/~啦啦啦!
To start, here is a little history and the differences between the VRC and Pro-Pipe. The VRC pipe is made for and works best with stock 2 bolt engines. The Pro-Pipe was designed after the VRC pipe specifically for modified engines. The Pro-Pipe was developed when Jan-Erik at Rc-Racing sent Victory several of our full mod 4 bolt engines. It wasn't easy, but Victory came up with a good overall performing pipe. This is a high torque, high reving pipe. From our testing, this pipe runs well on all modified 2 and 4 bolt engines. The Pro-Pipe is light weight and is a two piece pipe for easy install/removal.
The VRC and Pro-Pipe are similar looking. To identify the Pro-Pipe from the VRC look for the Victory RC stamp welded onto the pipe.



小A 发表于 12-4-4 01:08:27

沙发.. 看不懂英文 不会买啊哎 学问浅就是行不通啊, 郁闷死

lg_zb11 发表于 12-4-4 01:17:32

回复 小A 的帖子

其实勤奋是最重要的,一个一个单词的再百度上翻译,在纪录到本子上,就行~\(≧▽≦)/~啦啦啦

liyingxia 发表于 12-4-4 08:15:32

又消费啦 ~\(≧▽≦)/~啦啦啦

fwzflqwer 发表于 12-4-4 08:39:14

Rcr后刹车升级组件没买错,现在用的rcr买来mecatech的前刹都没装过车

zst117 发表于 12-4-4 09:03:51

给力啊,看来大家都 国外网站··

zst117 发表于 12-4-4 09:04:29

给力啊,看来大家都 国外网站··

lg_zb11 发表于 12-4-4 09:25:09

回复 zst117 的帖子

我是尝试 不知道能行吗

lg_zb11 发表于 12-4-4 09:26:13

回复 fwzflqwer 的帖子

我是各个部件都尝试下 当小白鼠 我的hpi原厂的刹车碟都变形了

lg_zb11 发表于 12-4-4 09:26:43

回复 liyingxia 的帖子

尝试下 这个网站看看怎么样
页: [1] 2
查看完整版本: 今天尝试在OBR的网站上买了点东西试试!希望能行!