DuraTrax Ice Charger, Discharger，Cycle
Dutatrax推出一台全能充电机，功能包括充电（带温控）、放电、循环、马达磨合功能很多，厂方公布价格：
Price: 139.99
picture/onroad/20041084544937357.jpg
picture/onroad/20041084551178303.jpg
IntelliPeak Ice meets the special charging needs of experienced electric car, truck and boat modelers, offering the a wide range of charge rates…the flexibility to handle multiple battery types…four charge modes (linear, reflex, impulse and "four-step")...plus easy operation and numerous programming options.
• Handles 1-10 NiCd or NiMH cells, and 1-4 lithium-ion (Li-Ion) or lithium-polymer (Li-Po) cells.
• Displays graphs which show charge and discharge voltage curves.
• Performs 1-10 cycles (NiCd and NiMH only) — retrieves data for 10 full cycles.
• Program up to 10 batteries in memory by custom names for easy recall and charger set-up.
picture/onroad/20041084553997364.jpg
The large LCD screen shows 8 lines of data and 21 characters per line, and even charts charge and discharge voltage curves! More information can be viewed without scrolling - making menus easy to use and messages easy to read.
[此贴子已经被作者于2004-10-8 4:58:23编辑过]
picture/onroad/2004108457368257.jpg
Its ability to break-in electric motors or operate commutator lathes is another IntelliPeak Ice feature that distinguishes it as the racer's choice among chargers.
With its advanced technology, uncomplicated menus, and simple pushbutton and dial operation, the Ice makes an enormous variety of functions very easy to use.
picture/onroad/20041084572825960.jpg
An optional temperature probe is available to monitor battery pack temperature. The simple but effective design of the sensor bracket allows the sensor to be quickly attached and removed from the pack while firmly holding the sensor in place for accurate temperature readings.
• Input Voltage: 1-15V DC
• Battery Types, # of cells: 1-10 Nickel-Cadmium cells (1.2-12.0V NiCd)
• 1-10 Nickel-Metal Hydride cells (1.2-12.0V NiMH)
• 1-4 Lithium-lon or Lithium-Polymer cells (3.6-14.8V Li-lon/Li-Po)
• Battery capacity range: 100-9900mAh
• Fast charge current: 0.1-8.0A (1C max for Li-lon/Po)
• Fast charge methods: linear, reflex, impulse and 4-step
• Fast charge termination: Peak detection for NiCd and NiMH "constant current / constant voltage" for Li-lon / Li-Po optional thermal cutoff for all battery types
• Peak sensitivity: 0-25mV adjustable
• Trickle charge current: 0-500mA (n/a for Li-lon / Li-Po)
• Discharge current: 0.1-10.0A adjustable
• Dishcharge cut-off voltage: 0.1-1.1V per cell NiCd & NiMH 2.5-3.7V per cell Li-lon / Li-Po
• Temperature cut-off range: 50-132°F (10-56°C)
• Cycle count: one to ten cycles (n/a for Li-lon / Li-Po)
• Cycle cooloff delay: 1-30 minutes adjustable
• Battery memories: 10
• Display type: 8 line, 21-character LCD (168 characters max)
• Graphical displays: Graphs charge and discharge voltage curves
• Output connectors: banana jacks (two adapter leads included)
• Motor break-in: 1.0-8.0V selectable, 1-120 minutes, 10A constant
• Case size: 5.5 x 1.8 x 5.9" (140 x 45 x 150mm)
• Weight: 21 oz. (605g)
Item no. DTXP4170
Price: 139.99
顶~~不错哦~~
页:
[1]