公告:
发表于 17-9-26 17:36:01 |显示全部楼层
本帖最后由 Traxxas 于 17-9-26 17:35 编辑

TRAXXAS技术贴视频第二十期---如何绑定遥控和接收

视频原创发布者 BY TRAXXAS
翻译者               BY TRAXXAS中国总代理电波模型
因涉及到模型专业术语,如若翻译有误,欢迎指正!

6508-TQi-standard-4CH.jpg
6533-TQi-TSM-Receiver-Top_副本.jpg
v.youku.com/v_show/id_XMzAzOTU3NTI2OA==.html

以英文原档为准,请参考:
How to Bind a Traxxas Transmitter and Receiver

You transmitter is bound to the vehicle’s receiver at the factory.
However, if you ever need to re-link the transmitter or bind a new transmitter to the receiver, follow this simple procedure.
Make sure the transmitter and the vehicles are both powered off.
Open the receiver box for access to the link button on the receiver.
Now, press and hold the set button on the transmitter as you turn it on.
The light on the transmitter should flash, indicating that it is a bind mode.
Press and hold the link button on the receiver as you power on the ESC, and wait for the solid green LEDs on both the transmitter and receiver.
You transmitter and now bound and ready to control the vehicle.

请支持行货电子设备,电波模型总代理承担非人为损件保修一年,直接换新!
如果您想了解更多关于我们品牌的资讯,
请咨询电波模型淘宝店旺旺客服:
http://rcmart.taobao.com/?spm=a1z10.1-c.0.0.U0xSpE
微信扫一扫,可得知最新资讯!
图片0.jpg 图片1.jpg
或联系我们
QQ  :2713236907/270570161
手机:13790546054  王小姐

广告投放|联系我们|手机|投稿|Archiver|About us|Advertise|遥控迷模型网|RCFans ( 粤ICP备10210518号-1 )

版权所有 RCFans.com © 2003-2016

返回顶部